This file is set.def, from which is created set.c.
It implements the "set" and "unset" builtins in Bash.

Copyright (C) 1987, 1989, 1991 Free Software Foundation, Inc.

This file is part of GNU Bash, the Bourne Again SHell.

Bash is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 1, or (at your option) any later
version.

Bash is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License along
with Bash; see the file COPYING.  If not, write to the Free Software
Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

$PRODUCES set.c

#include <stdio.h>
#include "../shell.h"
#include "../flags.h"

#include "bashgetopt.h"

extern int interactive;
extern int noclobber, no_brace_expansion, posixly_correct;
#if defined (READLINE)
extern int rl_editing_mode, no_line_editing;
#endif /* READLINE */

#define USAGE_STRING "set [--abefhknotuvxldHCP] [-o option] [arg ...]"

$BUILTIN set
$FUNCTION set_builtin
$SHORT_DOC set [--abefhknotuvxldHCP] [-o option] [arg ...]
    -a  Mark variables which are modified or created for export.
    -b  Notify of job termination immediately.
    -e  Exit immediately if a command exits with a non-zero status.
    -f  Disable file name generation (globbing).
    -h  Locate and remember function commands as functions are
        defined.  Function commands are normally looked up when
        the function is executed.
    -i  Force the shell to be an "interactive" one.  Interactive shells
        always read `~/.bashrc' on startup.
    -k  All keyword arguments are placed in the environment for a
        command, not just those that precede the command name.
    -m  Job control is enabled.
    -n  Read commands but do not execute them.
    -o option-name
        Set the variable corresponding to option-name:
            allexport    same as -a
            braceexpand  the shell will perform brace expansion
#if defined (READLINE)
            emacs        use an emacs-style line editing interface
#endif /* READLINE */
            errexit      same as -e
            histexpand   same as -H
            ignoreeof    the shell will not exit upon reading EOF
            interactive-comments
                         allow comments to appear in interactive commands
            monitor      same as -m
            noclobber    disallow redirection to existing files
            noexec       same as -n
            noglob       same as -f
            nohash       same as -d
            notify       save as -b
            nounset      same as -u
	    physical     same as -P
	    posix        change the behavior of bash where the default
			 operation differs from the 1003.2 standard to
			 match the standard
	    privileged   same as -p
            verbose      same as -v
#if defined (READLINE)
            vi           use a vi-style line editing interface
#endif /* READLINE */
            xtrace       same as -x
    -p  Turned on whenever the real and effective user ids do not match.
        Disables processing of the $ENV file and importing of shell
        functions.  Turning this option off causes the effective uid and
	gid to be set to the real uid and gid.
    -t  Exit after reading and executing one command.
    -u  Treat unset variables as an error when substituting.
    -v  Print shell input lines as they are read.
    -x  Print commands and their arguments as they are executed.
    -l  Save and restore the binding of the NAME in a FOR command.
    -d  Disable the hashing of commands that are looked up for execution.
        Normally, commands are remembered in a hash table, and once
        found, do not have to be looked up again.
#if defined (BANG_HISTORY)
    -H  Enable ! style history substitution.  This flag is on
        by default.
#endif /* BANG_HISTORY */
    -C  If set, disallow existing regular files to be overwritten
        by redirection of output.
    -P  If set, do not follow symbolic links when executing commands
        such as cd which change the current directory.

Using + rather than - causes these flags to be turned off.  The
flags can also be used upon invocation of the shell.  The current
set of flags may be found in $-.  The remaining n ARGs are positional
parameters and are assigned, in order, to $1, $2, .. $n.  If no
ARGs are given, all shell variables are printed.
$END

/* An a-list used to match long options for set -o to the corresponding
   option letter. */
struct {
  char *name;
  int letter;
} o_options[] = {
  { "allexport",  'a' },
  { "errexit",	  'e' },
  { "histexpand", 'H' },
  { "monitor",	  'm' },
  { "noexec",	  'n' },
  { "noglob",	  'f' },
  { "nohash",	  'd' },
#if defined (JOB_CONTROL)
  { "notify",	  'b' },
#endif /* JOB_CONTROL */
  {"nounset",	  'u' },
  {"physical",    'P' },
  {"privileged",  'p' },
  {"verbose",	  'v' },
  {"xtrace",	  'x' },
  {(char *)NULL, 0},
};

#define MINUS_O_FORMAT "%-15s\t%s\n"

void
list_minus_o_opts ()
{
  register int	i;
  char *on = "on", *off = "off";

  printf (MINUS_O_FORMAT, "braceexpand", (no_brace_expansion == 0) ? on : off);
  printf (MINUS_O_FORMAT, "noclobber", (noclobber == 1) ? on : off);

  if (find_variable ("ignoreeof") || find_variable ("IGNOREEOF"))
    printf (MINUS_O_FORMAT, "ignoreeof", on);
  else
    printf (MINUS_O_FORMAT, "ignoreeof", off);

  printf (MINUS_O_FORMAT, "interactive-comments",
	  interactive_comments ? on : off);

  printf (MINUS_O_FORMAT, "posix", posixly_correct ? on : off);

#if defined (READLINE)
  if (no_line_editing)
    {
      printf (MINUS_O_FORMAT, "emacs", off);
      printf (MINUS_O_FORMAT, "vi", off);
    }
  else
    {
      /* Magic.  This code `knows' how readline handles rl_editing_mode. */
      printf (MINUS_O_FORMAT, "emacs", (rl_editing_mode == 1) ? on : off);
      printf (MINUS_O_FORMAT, "vi", (rl_editing_mode == 0) ? on : off);
    }
#endif /* READLINE */

  for (i = 0; o_options[i].name; i++)
    {
      int *on_or_off, zero = 0;

      on_or_off = find_flag (o_options[i].letter);
      if (on_or_off == FLAG_UNKNOWN)
	on_or_off = &zero;
      printf (MINUS_O_FORMAT, o_options[i].name, (*on_or_off == 1) ? on : off);
    }
}

set_minus_o_option (on_or_off, option_name)
     int on_or_off;
     char *option_name;
{
  int option_char = -1;

  if (STREQ (option_name, "braceexpand"))
    {
      if (on_or_off == FLAG_ON)
	no_brace_expansion = 0;
      else
	no_brace_expansion = 1;
    }
  else if (STREQ (option_name, "noclobber"))
    {
      if (on_or_off == FLAG_ON)
	bind_variable ("noclobber", "");
      else
	unbind_variable ("noclobber");
      stupidly_hack_special_variables ("noclobber");
    }
  else if (STREQ (option_name, "ignoreeof"))
    {
      unbind_variable ("ignoreeof");
      unbind_variable ("IGNOREEOF");
      if (on_or_off == FLAG_ON)
	bind_variable ("IGNOREEOF", "10");
      stupidly_hack_special_variables ("IGNOREEOF");
    }
  
#if defined (READLINE)
  else if ((STREQ (option_name, "emacs")) || (STREQ (option_name, "vi")))
    {
      if (on_or_off == FLAG_ON)
	{
	  rl_variable_bind ("editing-mode", option_name);

	  if (interactive)
	    with_input_from_stdin ();
	  no_line_editing = 0;
	}
      else
	{
	  int isemacs = (rl_editing_mode == 1);
	  if ((isemacs && STREQ (option_name, "emacs")) ||
	      (!isemacs && STREQ (option_name, "vi")))
	    {
	      if (interactive)
		with_input_from_stream (stdin, "stdin");
	      no_line_editing = 1;
	    }
	  else
	    builtin_error ("not in %s editing mode", option_name);
	}
    }
#endif /* READLINE */
  else if (STREQ (option_name, "interactive-comments"))
    interactive_comments = (on_or_off == FLAG_ON);
  else if (STREQ (option_name, "posix"))
    {
      posixly_correct = (on_or_off == FLAG_ON);
      unbind_variable ("POSIXLY_CORRECT");
      unbind_variable ("POSIX_PEDANTIC");
      if (on_or_off == FLAG_ON)
	{
	  bind_variable ("POSIXLY_CORRECT", "");
	  stupidly_hack_special_variables ("POSIXLY_CORRECT");
	}
    }
  else
    {
      register int i;
      for (i = 0; o_options[i].name; i++)
	{
	  if (STREQ (option_name, o_options[i].name))
	    {
	      option_char = o_options[i].letter;
	      break;
	    }
	}
      if (option_char == -1)
	{
	  builtin_error ("%s: unknown option name", option_name);
	  return (EXECUTION_FAILURE);
	}
      if (change_flag (option_char, on_or_off) == FLAG_ERROR)
	{
	  bad_option (option_name);
	  return (EXECUTION_FAILURE);
	}
    }
  return (EXECUTION_SUCCESS);
}

/* Set some flags from the word values in the input list.  If LIST is empty,
   then print out the values of the variables instead.  If LIST contains
   non-flags, then set $1 - $9 to the successive words of LIST. */
set_builtin (list)
     WORD_LIST *list;
{
  int on_or_off, flag_name, force_assignment = 0;

  if (!list)
    {
      SHELL_VAR **vars;

      vars = all_shell_variables ();
      if (vars)
	{
	  print_var_list (vars);
	  free (vars);
	}

      vars = all_shell_functions ();
      if (vars)
	{
	  print_var_list (vars);
	  free (vars);
	}

      return (EXECUTION_SUCCESS);
    }

  /* Check validity of flag arguments. */
  if (*list->word->word == '-' || *list->word->word == '+')
    {
      register char *arg;
      WORD_LIST *save_list = list;

      while (list && (arg = list->word->word))
	{
	  char c;

	  if (arg[0] != '-' && arg[0] != '+')
	    break;

	  /* `-' or `--' signifies end of flag arguments. */
	  if (arg[0] == '-' &&
	      (!arg[1] || (arg[1] == '-' && !arg[2])))
	    break;

	  while (c = *++arg)
	    {
	      if (find_flag (c) == FLAG_UNKNOWN && c != 'o')
		{
		  char s[2];
		  s[0] = c; s[1] = '\0';
		  bad_option (s);
		  if (c == '?')
		    printf ("usage: %s\n", USAGE_STRING);
		  return (c == '?' ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
		}
	    }
	  list = list->next;
	}
      list = save_list;
    }

  /* Do the set command.  While the list consists of words starting with
     '-' or '+' treat them as flags, otherwise, start assigning them to
     $1 ... $n. */
  while (list)
    {
      char *string = list->word->word;

      /* If the argument is `--' or `-' then signal the end of the list
	 and remember the remaining arguments. */
      if (string[0] == '-' && (!string[1] || (string[1] == '-' && !string[2])))
	{
	  list = list->next;

	  /* `set --' unsets the positional parameters. */
	  if (string[1] == '-')
	    force_assignment = 1;

	  /* Until told differently, the old shell behaviour of
	     `set - [arg ...]' being equivalent to `set +xv [arg ...]'
	     stands.  Posix.2 says the behaviour is marked as obsolescent. */
	  else
	    {
	      change_flag ('x', '+');
	      change_flag ('v', '+');
	    }

	  break;
	}

      if ((on_or_off = *string) &&
	  (on_or_off == '-' || on_or_off == '+'))
	{
	  int i = 1;
	  while (flag_name = string[i++])
	    {
	      if (flag_name == '?')
		{
		  printf ("usage: %s\n", USAGE_STRING);
		  return (EXECUTION_SUCCESS);
		}
	      else if (flag_name == 'o') /* -+o option-name */
		{
		  char *option_name;
		  WORD_LIST *opt;

		  opt = list->next;

		  if (!opt)
		    {
		      list_minus_o_opts ();
		      continue;
		    }

		  option_name = opt->word->word;

		  if (!option_name || !*option_name || (*option_name == '-'))
		    {
		      list_minus_o_opts ();
		      continue;
		    }
		  list = list->next; /* Skip over option name. */

		  if (set_minus_o_option (on_or_off, option_name) != EXECUTION_SUCCESS)
		    return (EXECUTION_FAILURE);
		}
	      else
		{
		  if (change_flag (flag_name, on_or_off) == FLAG_ERROR)
		    {
		      char opt[3];
		      opt[0] = on_or_off;
		      opt[1] = flag_name;
		      opt[2] = '\0';
		      bad_option (opt);
		      return (EXECUTION_FAILURE);
		    }
		}
	    }
	}
      else
	{
	  break;
	}
      list = list->next;
    }

  /* Assigning $1 ... $n */
  if (list || force_assignment)
    remember_args (list, 1);
  return (EXECUTION_SUCCESS);
}

$BUILTIN unset
$FUNCTION unset_builtin
$SHORT_DOC unset [-f] [-v] [name ...]
For each NAME, remove the corresponding variable or function.  Given
the `-v', unset will only act on variables.  Given the `-f' flag,
unset will only act on functions.  With neither flag, unset first
tries to unset a variable, and if that fails, then tries to unset a
function.  Some variables (such as PATH and IFS) cannot be unset; also
see readonly.
$END

unset_builtin (list)
  WORD_LIST *list;
{
  int unset_function = 0, unset_variable = 0, opt;
  int any_failed = 0;
  char *name;

  reset_internal_getopt ();
  while ((opt = internal_getopt (list, "fv")) != -1)
    {
      switch (opt)
	{
	case 'f':
	  unset_function = 1;
	  break;
	case 'v':
	  unset_variable = 1;
	  break;
	default:
	  return (EXECUTION_FAILURE);
	}
    }

  list = loptend;

  if (unset_function && unset_variable)
    {
      builtin_error ("cannot simultaneously unset a function and a variable");
      return (EXECUTION_FAILURE);
    }

  while (list)
    {
      name = list->word->word;

      if (!unset_function &&
	  find_name_in_list (name, non_unsettable_vars) > -1)
	{
	  builtin_error ("%s: cannot unset", name);
	  any_failed++;
	}
      else
	{
	  SHELL_VAR *var;
	  int tem;

	  var = unset_function ? find_function (name) : find_variable (name);

	  /* Posix.2 says that unsetting readonly variables is an error. */
	  if (var && readonly_p (var))
	    {
	      builtin_error ("%s: cannot unset: readonly %s",
			     name, unset_function ? "function" : "variable");
	      any_failed++;
	      list = list->next;
	      continue;
	    }

	  /* Unless the -f option is supplied, the name refers to a
	     variable. */
	  tem = makunbound
	    (name, unset_function ? shell_functions : shell_variables);

	  /* This is what Posix.2 draft 11+ says.  ``If neither -f nor -v
	     is specified, the name refers to a variable; if a variable by
	     that name does not exist, a function by that name, if any,
	     shall be unset.'' */
	  if ((tem == -1) && !unset_function && !unset_variable)
	    tem = makunbound (name, shell_functions);

	  if (tem == -1)
	    any_failed++;
	  else if (!unset_function)
	    stupidly_hack_special_variables (name);
	}
      list = list->next;
    }

  if (any_failed)
    return (EXECUTION_FAILURE);
  else
    return (EXECUTION_SUCCESS);
}
